MOTOCROSS PERFECTION

Congratulations to James Stewart won the AMA motocross nationals! He did it by winning every race (24 out of 24) for a possible 600 points.

Looking for a Few Good Photos & Stories!

Me in the trenches

I'm just putting the word out for anyone who is interested! I would like to show the world all the hard work that we do! Have some pictures and/or stories you would like to share? Email me at: Smashedthumbs@yahoo.com and, I will give you credit! C'mon it's not the hard! And, why your at it leave me some comments!

Big Crane Pick

The big steel structure in these pictures is called the Aqueduct bridge. It is located in the little town of Lowell in Snohomish Co. The structure is only a pedestrian bridge that spans railroad tracks. The big hole in the center is for water run off from the streets and I-5. The water runs thru the bridge and comes out the other side to a water feature on the backside(the hole in the concrete wall in the back of the pic).
The bridge its self is about 180 feet long and weights a shit load! The crane used to pic this is a 400 ton mobile crane, pretty awesome.
(photos courtesy of Manny Barns)

First Email Submission on Job Site Photos!

Here is what will become the new South-bound lanes of 405 going over I-90 Bellevue. Looking at the bridge deck laid out before rebar & concrete.

I would like to thank our first submission of construction photos by email!
(photos curteousy of Karen Andrews)

The Start of The Wilburton Tunnel Demo

(Wilburton Tunnel Before)

Here is the Wilburton Tunnel dug out the day before demo. Crews worked two weeks digging out the dirt exposing the side walls that were previously covered, preparing for the demo.

This is the aftermath of a 24 hour demo period. Two thirds of the tunnel was demoed in the first weekend.

Here you can see the top two thirds of the tunnel has been removed, and, they moved to taking down the side walls.

Here is the mad dash to get the road cleaned up before 5 am, for Monday morning traffic.

(photos courtesy of,Mannie Barns)

(Wilburton Tunnel After)

Can you tell that there was total chaos over the weekend? Only a third of the tunnel remains to be removed by the weekend of August 15-17th.

You can view more photos on the removal of the Wilburton Tunnel on Flicker Here:

Wilburton Tunnel Demo

Big Toys for the Big Kids!

(This story and, photos were forwarded to me by, my uncle, Jim Elder a model enthusiast.)

This 1/9th scale radio-controlled C-17 model was built in the U.K. To date it has about 20 flights. It was built as the centerpiece of a 15 program television series produced in the U.K for the Home and Leisure satellite TV channel. Built with the aid of three friends, it took a year to build and, is powered with 4 Jetcat P-120 turbines, with a total thrust of 108 lbs. Weighing in at 250 lbs fully fueled and, carries 12.5 liters (3.3 U.S. gallons) of 95% kerosene and, 5% turbine oil fuel. the wingspan of this big boy is 20 feet and 8 inches, and the top of the fin hits 74 inches. (6feet 2 inches) above the ground. Take of weight is 264 lbs. The rear cargo doors open and they drop an r/c jeep on a pallet, as well as 2 free fall r/c parachutists. The model also, has smoke systems both of the inboard turbines, and uses 2.4 GHz data link to provide real-time data to a laptop computer on the ground while in flight. This data includes airspeed, turbine, RPM, EGT, fuel consumption, etc. It is covered in fiberglass and epoxy resin. Built mainly from balsa and ply, with many glass and carbon fiber moldings to reduce weight. This C-17 Globemaster III is one of the largest jet models in the world today! Complete with retractable landing gear and pneumatically operated flaps.

Pre Demolition of WilburtonTunnel

Contractors moving in the heavy artillery for attack on the Wilburton tunnel. Follow up Photos of the aftermath will be posted shortly! Stay away from Southbound 405 South of Bellevue this weekend and next!


An aerial view of the Wilburton Tunnel shows trucks removing dirt in
preparation for the assault.

Precast Panel Setting

Over this past week we have been in the process of, setting precast panels. These panels are constructed off site and, delivered to us ready to set into place. These will be used to conceal the retaining wall for cosmetic purposes.

We pick the panels with a 65 ton crane. Here you see the angled rigging to the left of the photo. These are on rolling blocks so when the panels are picked up they won't break in half. (side view)

When we pick panels we have to use two lines, one for the top of the panel (with the round ball at the top and, one line at the back. Once its in the air we are able to disconnect the rigging from the back of the panel.

Here's the panel hanging from one line as, the crane swings it into position.

(Photos curteousy of Smashedthumbs)
This is the first few panels that we set so far. You can see the crane to the left of the photo here. As you can see the wall is getting higher which makes the panel heaver. They can weigh between 5,000 to 11,000 lbs.

Always use a pick plan, BE SAFE!