Jul 18, 2008

Night Crew in Progress...

This is my crew and, I drilling shafts, 30 feet deep with our low drill and, then setting our piling which are 40 feet long with our 60 ton crane. This is temporary shoring to hold back, I-405.


Jul 13, 2008

Happy Birthday!

Photobucket
I Love you!
Leese

Jul 11, 2008

Here We Go Again...Another Freakin Night Show!


Working nights once again! In this picture you can see the drill rig, we use this to drill temporary shoring. (Made of steel H-pile, with one inch thick, steel plates in between.) These hold the dirt back so we can dig down along the side of the road. This is the construction of a new retaining wall for a new off ramp off I-405.
This pictures shows the 60 ton crane which we use to set the pile.

These are the pile that have been set 30 feet into the ground.
Here we are back filling the temporary shoring.
We use pea gravel in most areas for easy removal of the temp. shoring. Other times we use CDF which is, a sand, cement mix with little amount of cement. This just fills the voids around the pile to hold them into place.
(Photos courtesy of Smashedthumbs)

Jul 7, 2008

What is a Piledriver?

Someone may ask "What is a piledriver?" This is a question that I've tried to explain too many times to remember. This is my job, this is what I do! It's not a wresting move or a sexual position either so, get your mind out of the gutter!
The title "piledriver" is given to any member of the construction crew that work with the pile driving rigs. The actual piledriver rig is a vessel that drives piles into the the soil to provide the stability and, foundation for structures such as over passes, buildings, bridges or what have you. Pile drivers have a heavy weight placed between guides so that it can slide up and down in a fluid solid line. (Again, get your minds out of the gutter!) This is placed a top the pile and when the weight is raised to its highest point it is released thus, smashing the pile, driving it into the ground.
There, its that simple,
Piledrivers drive it Deeper!

Jul 1, 2008

This is Why We Call Our Blog Smashedthumbs!

~ A carpenter taking one for the team ~

Safety is our number one goal but, in our trade injuries come with consequences. Not only to the individual worker but, for the companies we work for. Always pay attention to the task in front of you, be aware of what is going on around you at all times. Never hold your guards, disable your guards, or pin your guards on your saws!
PLEASE BE SAFE!
Everyone wants to go home in one piece!

Jun 25, 2008

Follow Up Work on Girder Setting over I-90

After several weeks the girders are finally in place over I-90.
It took approximately 8 nights to set four spans equaling thirty two girders, with only sixteen left to set. As of now we are working on top of this bridge forming the deck soffit. (the form that holds the concrete.) These forms will allow the pouring of concrete to develop the roadway.

"A bums point of view" ~ ahhh home sweet home!
photos courteous of Matt Elder

Jun 17, 2008

Bridge Demo

This is what happens when truck drivers don't check their over-sized Loads! The bridge was severly damaged which resulted in the demolition of this bridige over I-90 near Easton.

Jun 16, 2008

The Hammer Test?

I was wandering around online like I do sometimes. Sometimes I will just sit and, think to myself, "what should I look up?" Then I looked down at my hands on the keyboard. My wedding ring is a bit raggedy. It shows a lot of wear and tear. Gold may not be the best material to wear when you work construction. It's pretty soft. I remember I was working on this one job and, a metal sheet actually came crashing down on my ring. It bent almost completely in half. My finger was squeezed right in the middle of it! My finger was okay but, I had to get my ring fixed of course, but, I think it may be time to check out some new mens wedding rings. I came across this cool site that has a video of some guy hammering away on some rings!
Check it out here: Hammer Test

Jun 15, 2008

Happy Father's Day!

Just wanted to tell you that you are an Awesome Dad!
You RocK!
We Love You!
from your, Girls ~

Jun 14, 2008

It's All in a Day's Work!

Working on yet another Saturday!

I-405 over I-90

Using a PC-800 excavator where a crane can't fit. Pulling temporary shoring sheets that were holding up 405. Notice how big this rig is compared to the (white) semi truck!

We used the PC-800 to vibro out the temp 40 ft. shoring pile.

Pulling the 8x14 sheets

(Photos courtesy of Matt Elder)

Jun 10, 2008

OfF LoAdInG...

(Photos courtesy of Bill Miller)
Here's a rare siting of a superintendent working! Picking them off as the arrive.
Continuing to set girders throughout the nights.










Jun 9, 2008

NiGhT CrEw...


(Photos courtesy of Bill Miller)

Setting the Girders over Southbound 405 over I-90 at night, due to freeway shut downs. The crane in this picture is a 500 ton, the other crane you don't see is the 450 ton. These are used to pick and set girders that weigh approximately 180,000 lbs. a piece. When project is complete this will be the new overpass for Southbound 405 over I-90.

Jun 8, 2008

What a Construction Guy Does On His Time Off...

Trip to Huntington Beach California


The view from the plane.... Mt. Hood from the plane... Surfing.....


Huntington Beach Pier The View from Our Room My wife on the beach..Lucky ME!

We had a Great Time!




Jun 5, 2008

Setting Girders -

Here we have the last setting of the girders over I-90. Girder setting is half way complete.






(Photos courtesy of Bill Miller)

May 6, 2008

I-405 Widening Project that I am Currently Working

Project Status
May 2008
On May 2nd crews set the 9th of 32 girders for the new I-405 southbound bridge over I-90.
Night closures on I-90, I-405: Starting April 29 through early May, crews will set bridge girders for the new southbound bridge over I-90. This work will be done in phases and, requires a series of weeknight closures of lanes and ramps on I-405 and I-90. Crews to remove Wilburton Tunnel in 2008. This project has been selected as Quieter Pavement test section.
Existing I-405/I-90 Interchange


The I-405/I-90 Interchange after completion of the South Bellevue Widening project. Improvements include a new southbound bridge over I-90 and a northbound bridge over Coal Creek Parkway.



This visualization shows the I-405 Master Plan for the I-405/I-90 Interchange. Elements other than those funded by the South Bellevue Widening project are unfunded at this time.